top of page
MTX Audio TX Series 300W 4-Channel Amplifier - TX2450

MTX Audio TX Series 300W 4-Channel Amplifier - TX2450


The MTX TX2450 amplifier is powerful and very flexible. It can power up 4 speakers (2Ω~8Ω) at the front, at the rear. Another example, it can power up the 2 front speakers plus a subwoofer. In any case, it shines with its legendary dynamics and exceptional musicality. The variable active filter allows it to be extremely precise: 12dB/oct high pass or variable low pass from 50 to 120Hz. If you don't know where to start adjusting the active filter, the potentiometer is equipped with an 80Hz "click" position. To avoid interference problems, we have equipped the TX2450 with balanced inputs. They perfectly isolate the audio ground of the amp so that it does not mix with the noisy ground of the power supply. This is a powerful technique that is usually found on high end amps. If your car stereo does not have RCA outputs, you can connect the TX2450 to the high level inputs. All you need to do is connect the factory speaker output cables directly to the high level input of the amplifier. Simple yet very practical.

  • Features

    • Classic Class-AB topology
    • Very compact size for an easy installation
    • 2Ω stereo and 4Ω bridged compatible
    • High quality components
    • 12dB/Oct flexible x-over
    • Full aluminium construction (excluding end-caps)
    • Thermo regulated fan connector (for one or two external fans)
  • Specifications

    • Class-AB 4-channel amplifier
    • CTA2006 certified power
      - 4x 50 watts RMS @ 4Ω THD+N ≤1% (60W RMS in testing with SMD / AP)
      - 4x 75 watts RMS @ 2Ω THD+N ≤1%
      - 2x 150 watts RMS bridged @ 4Ω THD+N ≤1%
    • Active x-over
      - High-pass (HPF) 12dB/Oct variable from 50Hz to 120Hz
      - Low-pass (LPF) 12dB/Oct variable from 50Hz to 120Hz
    • Signal/Noise ratio (1 watt) : >73dB
    • THD+Noise (Distortion) (1 watt) : ≤1%
    • Frequency response (±1dB) : 20Hz-30000Hz
    • Input sensitivity RCA : 200mV to 6V
    • Dimensions : 135mm x 220mm x 52mm
    • High and low level inputs
  • Find your local installation specialist

    If a DIY solution is not appealing we recommend using only a Car Audio Masters installation network partner to assist you with your installation. We have 3 key Audiocom CAM member locations in Western Australia and over 90 members are available Australia wide. To find your nearest CAM member to assist you with your installation, visit

bottom of page